Fuel Alternatives

Download Movies Players Here.

Voted #1 E85 Conversion kit for flex fuel in America!

BEFORE INSTALLING THE WHITE LIGHTNING READ AND FOLLOW THE INSTRUCTIONS BELOW!


Things to check before starting the conversion process: Spark Plugs and Spark Plug Cables: They should be kept with the same thermal degree indicated by the engine manufacturer; this should not be altered. They should be changed at manufacturers recommended intervals. Fuel, oil and air filters: They should be changed for the engine safety and user comfort sake. It is recommended to make the change at the first 500 miles after the White Lightning installation, because the oil filter and fuel filter can be contaminated with the sludge caused by gasoline. We recommend using Amsoil synthetic motor oil and fluids along with their high quality filters. Engine: In spite of the higher consumption per mile traveled, the ethanol is cleaner and does not cause problems and if used in an E85 mix it will promote better lubrication of the parts in contact with the mixture and thus, will increase the engine’s useful life and ensure a significant increase in fuel economy. Fuel Pump: Check the fuel pump pressure and flow. These items are important for the good operation of the system. The fuel pump should be in accordance and within the standards set by the vehicle manufacturer. After confirming the compliance of the data above, you may proceed with the White Lightning installation. The use of ethanol reduces the vehicles original fuel pump useful life, serious wear can occur due to the removing of the deposits left by the gasoline impurities in the fuel tank. Injection Nozzles: The injection nozzles should not be cleaned .The injection nozzles are gauged to run under the normal pressure of 3.0 bar, with 5% tolerance; a low tolerance that if not respected, can cause losses: increased fuel consumption, poor vehicle performance, bumps while changing gears and difficulty to reach the maximum speed. Polarity: The polarity of the injection nozzles is important; some vehicle manufacturers invert the feeding, thus causing problems when you have to install some equipment. However, White Lightning recognizes the polarity automatically, as well as the injection nozzle resistance and the current used, thus avoiding problems during the product installation. Oxygen sensor: It should be in perfect operating condition, which means that submitted to an evaluation it should be oscillating between 50 and 950 mill volts, always bordering on minimum and maximum. A mechanic can check this for you. All other sensors : Make sure that all other vehicle sensors are in good working condition, the White Lightning unit needs the proper data to run engine controls to allow normal driving conditions to be met.